13 Using VNC for remote access
VNC is a remote control software which allows you to see and control the HMI application remotely using your local mouse
and keyboard.
Remote access is particularly useful for administration and technical support. In order to use it you need to:
l start a server in the HMI device
l install a viewer on the remote device
Starting VNC server on WinCE devices 160
Starting VNC server on Linux devices 161
Starting VNC viewer 161
HMWIN Studio |User Manual| v206 (2017-06-30) | EN| © 2014-2017 Panasonic Electric Works Europe AG
159
To Next Page
Loading...
