Panasonic HMWIN - Widgets positioning

OnDataUpdate
Triggers the event when the tag value changes. The update moment depend on the time needed by the protocol to finish the
update process. For example the OnDataUpdate event can be triggered or not, depending on whether data becomes
available from protocol respectively after or before widgets being initialized for the first time. In particular, page change
notifications are more likely to happen withslow protocols and remote clients.
Note: The value read during OnActivate can be the same obtained from a subsequent OnDataUpdate event,
since OnDataUpdate notifications are sent asynchronously.
Widgets positioning
You can position widgets in the page using two methods:
l Snap to Grid
l Snap to Object
To display the grid, on the View menu, click Show Grid.
Snap to Grid
Path: View> Snap to Grid
When you move or re-size an object, its top left corner will align with the nearest intersection of lines in the grid, even if the
grid is not visible.
Setting grid properties
Path: View> Properties
Parameter Description
Spacing X Space in pixel between two lines/dots on the X axis
Spacing Y Space in pixel between two lines/dots on the Y axis
Type Grid type (dot or line)
Color Grid color
Snap to Object
Path: View> Snap to Object
When you move an object, it will align with other objects on the page.
When you select an object, one of the following hot points is selected as the source of the snap point, depending on the
area you pressed: top, top left, top right, bottom, bottom left, bottom right, left, right, center:
38
HMWIN Studio |User Manual|v206 (2017-06-30) |EN|© 2014-2017 Panasonic Electric Works Europe AG
Widgets positioning