Copying, moving, renaming a project
HMWIN Studio projects folder contain all the files of the project: to move, copy or backup a project, move or copy the
project folder to the desired location.
To rename a project use the File > Save Project As function: this operation might take a few minutes.
WARNING: Do not rename the project folders manually.
Communication protocols
Path: ProjectView> Config > Protocols
Device communication drivers are configured in the Protocol Editor.You can add up to the maximum number of protocols
as specified in Table of functions and limits. Variable and System Variables are not counted as protocols.
Note: you can run different Ethernet protocols over the same physical Ethernet port, but you cannot run different
serial protocols using the same serial port. Some serial protocols support access to multiple controllers, but this
option is set within the protocol itself which is still counted as one protocol.
16
HMWIN Studio |User Manual|v206 (2017-06-30) |EN|© 2014-2017 Panasonic Electric Works Europe AG
Communication protocols
To Next Page
Loading...
