Panasonic HMWIN - Upload projects

Installing Runtime from a USB drive
1. Prepare the Update Package as described in "Update package" on page70
2. Plug the USB drive in the device and follow the instructions for the type of device (see "System Settings" on
page379for details)
Note: Old versions of HMI devices may not support automatic installation of Runtime. Contact technical support
for more information.
Upload projects
Path: Run> Manage Target
You can copy a project from the Runtime to the computer where HMWIN Studio is running.
1. In the Runtime tab, select the IP address of the device from the drop-down list Target.
2. Click Retrieve Projects: a list of all the projects available is displayed.
3. Select project to upload
4. Click Upload Project
Upload could be password protected. See"Protecting access to HMI devices" on page421 for details.
5. If required, enter password. The upload process starts.
A copy of the project is saved in:
C:\Users\username\Documents\HMWIN Studio\workspace\Uploaded\RuntimeIPAddress\workspace\ProjectName
Note: If the upload operation fails, check firewall settings the computer where HMWIN Studio is running.
74
HMWIN Studio |User Manual|v206 (2017-06-30) |EN|© 2014-2017 Panasonic Electric Works Europe AG
Upload projects