Panasonic HMWIN - PLC variables

Variable Description
Data
type
read
only
Mac ID MAC ID of the main Ethernet interface of device string
read
only
Status Contains the result of the last operation required by writing inside the Adapter Parameters.
It is updated after each write operation.
l Empty string is meaning no errors
l Last error descriptions
string
read
only
Subnet Mask Subnet Mask of the main Ethernet interface of device string
read
only
PLC variables
Status of CODESYS V2 system integrated in HMI devices.
Variable Description
Data
type
PLC Status Status of integrated CODESYS V2.
0 = RUN
1 = PROGRAM NOT LOADED (program not loaded in memory or CODESYS
module not running because license missing)
2 = STOP (program loaded but not running)
int
read
only
Get CopyCodesysProject
Action Status
Status of CopyCodesysProject action related to integrated CODESYS V2.
0 = ACTION_NOT_CALLED
1 = ACTION_IN_PROGRESS
2 = ACTION_COMPLETED
3 = ACTION_ABORTED_CHK_FILE_MISSING
4 = ACTION_ABORTED_PRG_FILE_MISSING
5 = ACTION_ABORTED_SDB_FILE_MISSING
6 = ACTION_ABORTED_MUTIPLE_CHK_FILES_FOUND
7 = ACTION_ABORTED_MUTIPLE_PRG_FILES_FOUND
8 = ACTION_ABORTED_MUTIPLE_SDB_FILES_FOUND
int
read
only
HMWIN Studio |User Manual| v206 (2017-06-30) | EN| © 2014-2017 Panasonic Electric Works Europe AG
83
8 System Variables (Attach To)