Panasonic HMWIN - Alarms variables; Buzzer variables

Alarms variables
Number of alarms of the requested type.
Variable Description
Data
type
Alarm not acknowledged True when alarms unacknowledged is pending
(Not Triggered Not Acknowledged<>0) OR (Triggered Not
Acknowledged<>0)
boolean
read
only
Alarm triggered True when at least one alarm is triggered
(Triggered Acknowledged<>0) OR (Triggered <>0) OR (Triggered Not
Acknowledged<>0)
boolean
read
only
Number of missed alarm events Alarms exceeding the event queue. Queue length is defined in the
engineconfig.xml file.
int
read
only
Number of not triggered
acknowledged
Alarm condition no longer active; alarms already acknowledged int
read
only
Number of not triggered not
acknowledged
Alarma condition no longer active; awaiting acknowledgment int
read
only
Number of triggered
acknowledged
Alarm condition active; alarms already acknowledged int
read
only
Number of triggered alarms Alarm active: aknowledgement not required int
read
only
Number of triggered not
acknowledged
Alarm condition active; awaiting acknowledgment int
read
only
Note: For compatibility reasons, the older names are still valid but they usage is deprecated.
Buzzer variables
Adjust buzzer behavior.
HMWIN Studio |User Manual| v206 (2017-06-30) | EN| © 2014-2017 Panasonic Electric Works Europe AG
77
8 System Variables (Attach To)