19 Offline node management
When one of the controllers communicating with the HMI device goes offline, communication performance of the system
may eventually decrease.
The offline node management feature recognizes offline controllers and removes them from communication until they come
back online.
Additionally, if you know that any of the controllers included in the installation is going to be offline for a certain time, you
can manually disable it to maximize system performance.
Note: This feature is not supported by all communication protocols. Check protocol documentation to know if it
is supported or not.
Offline node management process 208
Manual offline node management process 208
Manual offline configuration 208
Automatic offline node detection 209
HMWIN Studio |User Manual| v206 (2017-06-30) | EN| © 2014-2017 Panasonic Electric Works Europe AG
207
To Next Page
Loading...
