Note: All variables are read only; you cannot use them to update the system clock.
Variable Description
Standard Offset Offset in minutes when standard time is set, with respect to GMT (for example: -8x60 = -480
minutes).
Standard Week Week in which the standard time starts (for example: First = 1).
Standard Month Month in which the standard time starts. Range: 0–11. (for example: November = 10).
Standard Day Day of week in which the standard time starts (for example: Sunday = 0).
Standard Hour Hour in which the standard time starts (for example: 02 = 2).
Standard
Minute
Minute in which the standard time starts (for example: 00 = 0).
DST Offset Offset in minutes when DLS time is set, with respect to GMT
DST Week Week in which the DLS time starts
DST Month Month in which the DLS time starts. Range: 0–11.
DST Day Day of week in which the DLS time starts
DST Hour Hour in which the DLS time starts
DST Minute Minute in which the DLS time starts
Device variables
Device settings and operating status information.
Variable Description Data type
Available
System
Memory
Free available RAM memory in bytes. uint64
read only
Backlight
Time
Activation time in hours of the display backlight since production of the device. unsignedInt
read only
Battery LED Enables/disables the low battery LED indicator (when available).
0 = disabled
1 = enabled
Not available on Linux platforms (see "HMI devices capabilities" on page435
for panels details)
int
Battery Reserved int
HMWIN Studio |User Manual| v206 (2017-06-30) | EN| © 2014-2017 Panasonic Electric Works Europe AG
79
8 System Variables (Attach To)
To Next Page
Loading...
