8 System Variables (Attach To)
Path: Source> Attach to
System variables are special tags containing information about the HMI runtime.
Note: System Variables are available also as a standard protocol in the Protocol Editor. Use System Variables
as a protocol when you have to transfer data between system variables and tags from devices, or to select
custom refresh rate for a system variable.
Alarms variables 77
Buzzer variables 77
Communication variables 78
Daylight Saving Time variables 78
Device variables 79
Dump information variables 81
FTP client variables 82
Keypad variables 82
Network variables 82
PLC variables 83
HMWIN Studio |User Manual| v206 (2017-06-30) | EN| © 2014-2017 Panasonic Electric Works Europe AG
75
To Next Page
Loading...
