Panasonic HMWIN - Page 315

Parameter Description
l m=0 is Read Only
l m=1 is Write Only
l m=2 is Read/Write
The below JavaScript code will generate the same table of the previous example using the Table Data Source Widget
var model = [];
var row_templates = {
_h : [
[ [] , [] ], //rowType = 0
[ ["text"] , ["value"] ] //rowType = 1
]
}
var row_data1 = {
_t : 0,
_v : []
}
var row_data2 = {
_t : 1,
_v : ["Temperature:", { _c : "dl" , s : "_TagMgr", a : "Tag1", i: 0, m : 2 }]
}
var row_data3 = {
_t : 1,
_v : ["Humidity:", { _c : "dl" , s : "_TagMgr", a : "Tag2", i: 0, m : 2 }]
}
var row_data4 = {
_t : 1,
_v : ["Noise:", { _c : "dl" , s : "_TagMgr", a : "Tag3", i: 0, m : 2 }]
}
var row_data5 = {
_t : 1,
_v : ["Brightness:", { _c : "dl" , s : "_TagMgr", a : "Tag4", i: 0, m : 2 }]
}
model[0] = row_templates;
model[1] = row_data1;
model[2] = row_data2;
model[3] = row_data3;
model[4] = row_data4;
model[5] = row_data5;
HMWIN Studio |User Manual| v206 (2017-06-30) | EN| © 2014-2017 Panasonic Electric Works Europe AG
313
32 Special widgets