None Will not be executed on remote clients (run only inside the local HMI device)
Client Will be executed on HMWIN Client
Web Will be executed on Web client
Both Will be executed on both HMWIN Client and Web clients
getClientType
project.getClientType()
The JavaScript “getClientType” return the “Enable Global JavaScript for remote” value.
l 0 = None
l 1 = Client
l 2 = Web
l 3 = Both
Use this function inside JavaScript at page level.
Max Bandwidth (Kbs)
Limit for maximum data sent by server (useful for old slow browsers). Set to 0 to use all the available bandwidth (default)
Web clients connection mode
Auto The connection mode is selected by the client (default)
SSE Force the Server-Sent Events mode
Long Polling Force the Long-polling mode
Target Zoom Factor
It is the zoom factor of the HMI device that will be applied when project is loaded at run time.
Range 0.3–2.9
Default value 1 = no zoom
Background color option
When the defined page is smaller of the entire display area, colorize the area that is not covered from the page (for example
when page is Zoom Out)
60
HMWIN Studio |User Manual|v206 (2017-06-30) |EN|© 2014-2017 Panasonic Electric Works Europe AG
Behavior
To Next Page
