Santana PS-10 User Manual

MANUAL TRANSMISSION 7A-9
5) Remove the fixing elements (5&6) from constant velocity
joint (3) and (4); remove forward and rear propeller shaft.
6) Disconnect forward section (first section) of the exhaust pipe
from the turbo-compressor gas outlet elbow joint.
WARNING:
Never work on the exhaust system when it is hot.
A
4
6
3
5
7
4) Before removing propeller shaft, mark the flange (A) in order
to assemble them in the same position.
7) Disconnect the speedometer cable (7) and ground cable.

Santana PS-10 Specifications

General

Brand	Santana
Model	PS-10
Category	Automobile
Language	English