System programming in expert mode
Administration and maintenance
A31003-K16-X001-3-7620
,
07/99
7-28
Hicom 100 E Version 2.1, Service manual
30
Remote administration
30 1 1 DTMF access, 0 = no access/1 = access as master/2 = access as
slave/3 = master and slave
30 2 2 ISDN access trunk, 0 = release procedure/1 = Logon (DDI) without
code/2 = Logon (DDI) with code
30 3 3 Other accesses, 0 = release procedure/1 = Logon (DDI) without
code/2 = Logon (DDI) with code
30 4 4 DDI no., remote administration, max. 11 characters
5 5 Internal ext. no., remote administration, max. 5 characters
6 6 Reset access code (6 characters): 0 = reset
7 7 Automatic customer data printout, access 0 = no/1 = yes
Codes Function
ABC
A
= SW 2.0.1+;
B
= SW 2.0.2;
C
= SW 2.1
Table 7-4 Codes for expert mode
To Next Page
Loading...
