Siemens Hicom 112 User Manual

System settings
Programming guide
A31003-K16-X001-3-7620
,
07/99
10-64
Hicom 100 E Version 2.1, Service manual
10.7.11 Signal key mode (as of SW version 2.0.2)
A call from a DTMF or entry telephone is retrieved after being placed on consultation hold by
pressing the signal key once (default setting) and timeout. If necessary, you can set the number
of times the signal key is to be pressed to two. This means that the waiting time before retrieval
can be avoided.
10.7.12 Night service (as of SW version 2.0.2)
It is possible to limit the number of extensions with night service. Up to 5 authorised extensions
can be defined (stations 1–5).
If no extension is defined, all stations have night service.
Example
: night service is to be enabled for extensions 11 and 23.
Input sequence Meaning Display
A
2 1 8 (up to SW2.0.2)
2 1 18 (as of SW2.1)
Signal key mode Retrieve: press once
B*
Change input Retrieve:
C2
Select press twice Retrieve: press twice
D<OK>
Confirm input Retrieve: press twice
E
<F8> Return to Start menu System administration
The system can be reset to "press once" by entering "1" under point C.
Input sequence Meaning Display
A
2 1 9 1 (up to SW2.0.2)
2 1 191 (as of SW2.1)
Night service, station 1
(select station 1-5 with "+" and "–" or
directly with #)
Station 1: –
B*
Change input Station 1:
C11
Enter ext. 11 Station 1: 11
D
<OK> Confirm input Station 1: 11
E
+ Scroll to station 2 Station 2: –
F
* Change input Station 2:
G
23 Enter ext. 23 Station 2: 23
H<OK>
Confirm input Station 2: 23
J
<F8> Return to Start menu System
administration
Night service can be enabled for other stations by entering other ext. numbers under point C
and G.

Siemens Hicom 112 Specifications

General

Brand	Siemens
Model	Hicom 112
Category	Telephone
Language	English