Siemens Hicom 112 User Manual

System setting
s
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
10-69
Programming guide
10.7.14.3 Changing the display language throughout the system (up to SW 2.0.1+)
The display language can be changed. A system-wide language setting is available for the
following languages up to and including SW version 2.0.1+:
1 - German, 2 - English, 3 - French, 4 - Spanish, 5 - Italian, 6- Dutch, 7 - Portuguese, 8 - Finnish
Example
: change the display language to Spanish.
10.7.14.4 Changing the display language for each extension (as of SW version 2.0.2)
The display language can be set for each extension as of version 2.0.2. The following
languages are available:
11 - German, 12 - English, 13 - French, 14 - Spanish, 15 - Italian, 16 - Dutch, 17 - Portuguese,
18 - Finnish, 19 - Czech, 20 - Danish, 21 - Swedish, 22 - Norwegian, 23 - Turkish
Example
: the display language at extension 13 is to be set to Turkish.
F away from office
Enter message 4: Away from office
G<OK>
Confirm input 4: Away from office
H
<F8> Return to Start menu System administration
Input sequence Meaning Display
A 1 8 1 5
Language setting Language: German
B
* Change input Language:
C4
Select language Language: Spanish
D<OK>
Confirm input Language: Spanish
E
<F8> Return to Start menu System administration
Input sequence Meaning Display
A 1 8 1 5
Display language for ext. 11
(select ext. 11 to 74 with "+" and "–" or
directly with #)
ext. 11: German
B + Display language for ext. 12 ext. 12: German
C + Display language for ext. 13 ext. 13: German
D * Change input ext. 13:
E23
Select Turkish ext. 13: Turkish
F<OK>
Confirm input ext. 13: Turkish
G <F8> Return to Start menu System administration
Input sequence Meaning Display
An absence message can be deleted by pressing the F3 key under point F.

Siemens Hicom 112 Specifications

General

Brand	Siemens
Model	Hicom 112
Category	Telephone
Language	English