Station attributes
Programming guide
A31003-K16-X001-3-7620
,
07/99
10-34
Hicom 100 E Version 2.1, Service manual
10.5.4.9 Reference extensions
Classes of service are assigned on a line-specific basis for a reference extension, Section
10.5.4.
Example
: during the day, ext. 11 has "unrestricted trunk access" and is the reference extension
for all other extensions with "unrestricted trunk access" during the day. Ext. 13 is authorised to
telephone in accordance with the allowed numbers list (as of SW 2.0.2 = list 1) and is the
reference extension for all other extensions restricted to the numbers in the allowed numbers
list (as of SW 2.0.2 = list 2). Two lines are connected.
Input sequence Meaning Display
A1 4 1
Trunk access during the day for ext. 11
on line 1
(select ext. 11–74 directly with "#", and
lines 1–32 by scrolling with "+" and "–
")
Ext. 11, line 1: seized
B#
Select extension Ext.:
C13
Enter ext. 13 Ext.: 13
D<OK>
Trunk access during the day for ext. 13 Ext. 13: as for ext. 11
E*
Change input Change for ext. 13:
F
2 Enter new data Ext. 13, line 1: seized
G
* Change input Ext. 13, line 1:
H
3 Up to 2.0.1+ authorized in accordance
with allowed numbers list as of 2.0.2
authorized in acc. with allowed
numbers list 1
Ext.: 13, line 1: allowed
numbers list or
allowed nos. list 1
J
<OK> Confirm input Ext. 13, line 1: allowed
numbers list or
allowed nos. list 1
K
+ Scroll to line 2 Ext. 13, line 2: seized
L
* Change input Ext. 13, line 2:
M
3 Up to 2.0.1+ authorised in acc. with
allowed numbers list as of 2.0.2
authorised in acc. with allowed
numbers list 1
Ext. 13, line 2: allowed
numbers list or
allowed nos. list 1
N
<OK> Confirm input Ext. 13, line 2: allowed
numbers list or
allowed nos. list 1
O
<F8> Return to Start menu System administration
Classes of service <0> to <4> or <0> to <14> can be assigned by entering a value from "0"–
"4" or "0"–"14" under points H or M.
To Next Page
Loading...
Need help?
General