Siemens Hicom 112 User Manual

System setting
s
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
10-75
Programming guide
Example
: the charge factor is to be set to 50.
10.7.15.7 Changing the currency unit
The default currency unit is "GBP". An optiset (E) memory telephone is necessary to change
the currency unit.
Example
: the currency unit is to be set to "SFr".
10.7.15.8 Changing the ISDN factor (as of SW version 2.0.2)
The default ISDN factor is "5" (for transferring the charge factor from the network provider). This
can be changed to any value up to 65535.
Example
: the charge factor is to be set to 50.
Input sequence Meaning Display
A1 1 4
Charge factor Factor: 5
B
* Change input Factor:
C50
Change charge factor to 50 Factor: 50
D<OK>
Confirm input Factor: 50
E
<F8> Return to Start menu System administration
The charge factor can be changed to a selected value by entering a value from "0" to "65535"
under point C.
Input sequence Meaning Display
A1 1 5
Currency unit Currency:GBP
B
* Change input Currency:
CSFr
Change currency unit to SFr Currency: SFr
D<OK>
Confirm input Currency: SFr
E
<F8> Return to Start menu System administration
Any unit can be programmed by entering a unit comprising up to 3 digits under point C.
Input sequence Meaning Display
A1 1 6
ISDN factor Factor: 5
B
* Change input Factor:
C50
Change charge factor to 50 Factor: 50
D<OK>
Confirm input Factor: 50
E
<F8> Return to Start menu System administration
The ISDN factor can be changed to any value from "0" to "65535" entered under point C.

Siemens Hicom 112 Specifications

General

Brand	Siemens
Model	Hicom 112
Category	Telephone
Language	English