Siemens Hicom 112 User Manual

Station attribute
s
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
10-41
Programming guide
"Group ringing" is preprogrammed for all call groups (default setting).
Example overleaf.
Example
: call group 883 is to be programmed as a "linear group call".
10.6.2.3 Group names
A name can be assigned for each call group. This name will then appear on the caller’s display
when this group is dialled.
An optiset (E) memory telephone is necessary for entering names!
Example
: call group 883 is to be named "Sales".
Input sequence Meaning Display
A 1 5 1 6 2
Ringing mode for group 881
(select group 881–888 by scrolling
with "+" and "–" or directly with "#")
Group 881: group
ringing
B#
Select group Group:
C883
Enter group 883 Group: 883
D<OK>
Confirm input Group 883: grp ringing
E*
Change input Group 883:
F
2 Linear group call Group 883: lin. grp. call
G
<OK> Confirm input Group 883: lin. grp. call
H
<F8> Return to Start menu System administration
One of the three possible ringing modes can be defined for a group by entering the ringing
mode types 1, 2 or 3 under point F.
Input sequence Meaning Display
A 1 5 1 6 3
Ringing mode of group 881
(select group 881 to 888 with "+" and
"–" or directly with "#")
Group 881:
B#
Select group Group:
C883
Enter group 883 Group: 883
D<OK>
Confirm input Group 883: –
E*
Change input Group 883:
F
Sales Name for group 883 = "Sales" Group 883: Sales
G
<OK> Confirm input Group 883: Sales
H
<F8> Return to Start menu System administration
An assigned name can be deleted by pressing the F3 key under point F.

Siemens Hicom 112 Specifications

General

Brand	Siemens
Model	Hicom 112
Category	Telephone
Language	English