Siemens Hicom 112 User Manual

Q-Sig networkin
g
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
4-13
Features
4.17 Q-Sig networking
4.18 Euro-ISDN to PBX
Feature Remarks
BC
- basic call
Includes consultation hold
ID
- identification
CLIP, CLIR, COLP, COLR
CT
- call transfer
Transfer
CC
- call completion
Callback
CFU
- call forwarding unconditional
Immediate call forwarding
NA
- name identification
Name display
CINT
- call interception
Intercept
CI
- call intrusion
Intrusion
RE
- recall
Recall in the network
Feature Remarks
MSN -
multiple subscriber number
Multiple subscriber numbers
DDI -
direct dialling in
Direct dialling in
CLIP -
calling line identification presentation
Transfer personal ext. no.
CLIR -
calling line identification restriction
No CLIP
COLP -
connected line ident. presentation
Display number of caller A
COLR -
connected line ident. restriction
No COLP
AOCD -
advice of charge during
Display call charges during call
AOCE -
advice of charge end
Display call charges after call
CFU -
call forwarding unconditional
Immediate call diversion
CFNR -
call forwarding no reply
Call forwarding, no reply
CFB -
call forwarding busy
Call forwarding, busy
CCBS -
completion of calls to busy subscr.
Callback, busy
CH -
call hold
Call hold
CW -
call waiting
Camp-on
3PTY -
three party service
Internal conference with additional external ext.
SUB -
subaddressing
Provide info. in addition to the ext. number
MCID -
malicious call identification
Trace nuisance/malicious callers (via Telecom only)

Siemens Hicom 112 Specifications

General

Brand	Siemens
Model	Hicom 112
Category	Telephone
Language	English