Siemens Hicom 112

System setting
s
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
10-63
Programming guide
10.7.9 Alerting tone during conference (as of SW version 2.0.2)
The alerting tone can be deactivated during a conference.
10.7.10 Alerting tone and ring in call pickup groups
The alerting tone and ring can be deactivated within a call pickup group as of SW version 2.0.2.
Input sequence Meaning Display
A
2 1 7 1 (up to SW2.0.2)
2 1 171 (as of SW2.1)
Conference tone Alerting tone: on
B*
Change input Alerting tone:
C0
Select tone OFF Alerting tone: off
D<OK>
Confirm input Alerting tone: off
E
<F8> Return to Start menu System administration
The conference tone can be reactivated by entering "1" under point C.
Input sequence Meaning Display
A
2 1 7 2 (up to SW2.0.2)
2 1 172 (as of SW2.1)
Call pickup ring/tone Alerting tone: on
B*
Change input Alerting tone:
C0
Select tone OFF Alerting tone: off
D<OK>
Confirm input Alerting tone: off
E
<F8> Return to Start menu System administration
The ring and tone can be reactivated by entering "1" under point C.