Siemens Hicom 112 User Manual

Station attributes
Programming guide
A31003-K16-X001-3-7620
,
07/99
10-48
Hicom 100 E Version 2.1, Service manual
●
The second step entails assigning call destination list 13 to ext. 20 for external calls during
the day, see "Reference for day", Section 10.6.4.1.
●
The third step entails entering extensions 11 to 18 as group members of call group 888,
see "Group members", Section 10.6.2.1.
10.6.7.2 Call forwarding times
The number of rings per destination index can be modified for each call destination list. The
default value for all 16 call destination lists is 3. A ring attempt lasts approx. 5 seconds.
Example
: a call is to be forwarded to the next destination index in call destination list 13 after
30 seconds. The number of rings must be set to 6 (6 x 5 sec. = 30 sec.).
F
* Change input List 13, dest. 2:
G
11 Dest index 2 = ext. no. 11 (ext. 11) List 13, dest. 2: 11
H
<OK> Confirm input List 13, dest. 2: 11
J
+ Scroll to dest. index 3 List 13, dest. 3: –
K
* Change input List 13, dest. 3:
L
888 Dest. index 3 = ext. no. 888 (grp.888) List 13, dest. 3: 888
M
<OK> Confirm input List 13, dest. 3: 888
N
<F8> Return to Start menu System administration
A destination index can be deleted by pressing the F3 key under point G or L.
Input sequence Meaning Display
A 1 5 1 9 5
Number of rings for call dest. list 1
(select list 1–16 with "+" and "–" or
directly with "#")
for list 1: 3
B#
Select CDL for list:
C13
Enter CDL 13 for list: 13
D<OK>
Confirm input for list 13: 3
E*
Change input for list: 13
F
6 Number of rings = 6 for list 13: 6
G
<OK> Confirm input for list 13: 6
H
<F8> Return to Start menu System administration
The number of rings can be programmed by entering a value between 1 and 15 under point F.
Input sequence Meaning Display

Siemens Hicom 112 Specifications

General

Brand	Siemens
Model	Hicom 112
Category	Telephone
Language	English