Siemens Hicom 112 User Manual

Station attributes
Programming guide
A31003-K16-X001-3-7620
,
07/99
10-20
Hicom 100 E Version 2.1, Service manual
10.5.1.5 Headset
If released, this feature enables every optiset and optiset E system telephone to be equipped
with a headset.
The system automatically detects a headset adapter for optiset E telephones (applicable as of
SW 2.0.2). Class-of-service release is not required in this instance.
Example
: ext.11 is equipped with a headset
10.5.1.6 Call pickup groups
Call pickup groups with up to 16 extensions can be set up in Hicom 100E. An extension can
only belong to one call pickup group.
Up to SW 2.0.1+, there were 2 call pickup groups, as of SW 2.0.2, 8 call pickup groups will be
available.
Example
: ext. 12 and 13 are to be assigned to "call pickup group 1".
Input sequence Meaning Display
A 1 3 6 (up to 2.0.1+)
1 3 1 6 (as of 2.0.2)
Headset for ext. 11
(select ext. 11 to 74 with "+" and "–" or
directly with "#")
Ext. 11: off
B*
Change input Ext. 11:
C1
Release headset Ext. 11: on
D<OK>
Confirm input Ext. 11: on
E<F8>
Return to Start menu System administration
An activated headset feature can be cancelled by entering "0" under point C.
Telephones with headsets must have a release key.
Input sequence Meaning Display *)
A 1 3 7 (up to 2.0.1+)
1 3 1 7 (as of 2.0.2)
Call pickup group for ext. 11
(select ext. 11–74 with "+" and "–" or
directly with "#")
Ext. 11: –
B+
Call pickup group for ext. 12 Ext. 12: –
C*
Change input Ext. 12:
D1
Call pickup group 1 for ext. 12 Ext. 12: group 1
E<OK>
Confirm input Ext. 12: group 1
F
+ Call pickup group for ext. 13 Ext. 13: –
G
* Change input Ext. 13:

Siemens Hicom 112 Specifications

General

Brand	Siemens
Model	Hicom 112
Category	Telephone
Language	English