Networkin
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
10-15
Programming guide
10.3.10 Route names
Each of the 4 routes can be assigned a name which appears on system telephone displays.
An optiset(E) memory telephone is required to enter route names.
Example
: route 1 is to be called "trunk".
Input sequence Meaning Display
A 1 6 5 (up to
SW2.0.2)
1 6 15 (as of SW 2.1)
Name for route 1
(select route 1–4 with "+" and "–" or
directly with "#")
Route 1: –
B*
Change input Route 1:
CTrunk
Name for route 1 = "trunk" Route 1: trunk
D<OK>
Confirm input Route 1: trunk
E<F8>
Return to Start menu System administration
An assigned name can be deleted by pressing the F3 key under point C.
To Next Page
Loading...
