Siemens Hicom 112 User Manual

Station attributes
Programming guide
A31003-K16-X001-3-7620
,
07/99
10-52
Hicom 100 E Version 2.1, Service manual
10.6.8.2 Intercept console at night
In Hicom 100E, ext. 11 is defined as the intercept console during the night by default. All
incoming calls at night which were not dialled using an extension DDI number but with the
console code (Section 10.6.8.3) are signalled at the intercept console. Moreover, incoming
calls which could not be switched can also be signalled at the intercept console (see "Defining
intercept criteria", Section 10.6.9).
An extension or a call group can be an intercept console during the night.
Since the intercept console during the night is assigned to a call destination list (Section
10.6.4), the call settings defined in this call destination list are applicable.
Example
: call group 881 is to act as the intercept console at night.
Input sequence Meaning Display
A 1 5 1 7
Intercept console per line during the
day
(select line 1–32 with "+" and "–" or
directly with "#")
Line 1: 11
B+
Scroll to line 2 Line 2: 11
C+
Scroll to line 3 Line 3: 11
D*
Change input Line 3:
E15
Select intercept console Line 3: 15
F
<OK> Confirm input Line 3: 15
G
+ Scroll to line 4 Line 4: 11
H
* Change input Line 4:
J
15 Select intercept console Line 4: 15
K
<OK> Confirm input Line 4: 15
L
<F8> Return to Start menu System administration
Input sequence Meaning Display
A 1 5 1 4
Intercept console at night Ext. no.: 11
B*
Change input Ext. no.:
C 881
Select intercept console Ext. no.: 881
D<OK>
Confirm input Ext. no.: 881
E
<F8> Return to Start menu System administration
A different extension or call group can be programmed as the intercept console at night by
entering another extension number under point C.

Siemens Hicom 112 Specifications

General

Brand	Siemens
Model	Hicom 112
Category	Telephone
Language	English