System settings
Programming guide
A31003-K16-X001-3-7620
,
07/99
10-62
Hicom 100 E Version 2.1, Service manual
10.7.7 Caller list display mode (as of SW version 2.0.2)
Up to 10 internal and external calls are stored and displayed in the caller list.
Alternatively, the caller list can be set to external calls only.
Example
: external calls only are to be displayed in the caller list.
10.7.8 Automatic line reservation (as of SW version 2.0.2)
All optiset telephones are equipped with a feature to reserve an external line which is currently
seized.
Example
: releasing automatic line reservation
Input sequence Meaning Display
A
2 1 5 (up to SW2.0.2)
2 1 15 (as of SW2.1)
Caller list mode Call types: external,
internal
B*
Change input Call types:
C1
Select enable Call types: only external
D<OK>
Confirm input Call types: only external
E
<F8> Return to Start menu System administration
"Display external and internal calls" can be set by entering "2" under point C.
Input sequence Meaning Display
A
2 1 6 (up to SW2.0.2)
2 1 16 (as of SW2.1)
Automatic line reservation Status: off
B*
Change input Status:
C1
Select reservation ON Status: on
D<OK>
Confirm input Status: on
E
<F8> Return to Start menu System administration
Automatic line seizure can be deactivated by entering "0" under point C.
To Next Page
Loading...
Need help?
General