Siemens Hicom 112 User Manual

System settings
Programming guide
A31003-K16-X001-3-7620
,
07/99
10-68
Hicom 100 E Version 2.1, Service manual
10.7.14 Displays
10.7.14.1 Changing message texts
The default message texts (0 to 9) can be changed. An optiset E memory telephone is required
for this purpose.
Maximum text length: 24 digits.
Example
: change message text 7 from "Please join me" to "Call taxi".
10.7.14.2 Changing absence messages
The default absence messages (0 to 9) can be changed. An optiset (E) memory telephone is
required for this purpose.
A colon placed after an absence message signifies that additional digits can be entered for this
message.
Maximum message length: 24 digits.
Example
: change absence message 4 from "Gone to lunch" to "Away from office".
Input sequence Meaning Display
A 1 81 (up to SW2.0.1+)
1 8 1 1(as of SW2.0.2)
Message text
(select text 0–9 with "+" and "–" or
directly with "#")
0: Please call back
B
# Select text :
C7
Enter message text : 7
D
<OK> Confirm input 7: Please join me
E
* Change input 7:
F Call taxi
Enter text 7: Call taxi
G<OK>
Confirm input 7: Call taxi
H
<F8> Return to Start menu System administration
A message text can be deleted by pressing the F3 key under point F.
Input sequence Meaning Display
A 1 8 2 (up to SW 2.0.1+)
1 8 1 2(as of SW2.0.2)
Absence message
(select text 0–9 with "+" and "–" or
directly with "#")
0: Back at:
B
# Select message :
C4
Enter absence message : 4
D
<OK> Confirm input 4: Gone to lunch
E
* Change input 4:
An absence message can be deleted by pressing the F3 key under point F.

Siemens Hicom 112 Specifications

General

Brand	Siemens
Model	Hicom 112
Category	Telephone
Language	English