Siemens Hicom 112 User Manual

System settings
Programming guide
A31003-K16-X001-3-7620
,
07/99
10-66
Hicom 100 E Version 2.1, Service manual
10.7.13.3 Line codes
Each line is assigned a line code by default. The codes "801" to "832" are assigned to lines 1
to 32.
Taking the remaining code plans into consideration, these codes can be changed (they may
comprise up to 3 digits).
Example
: changing the code for line 1 to "833"
10.7.13.4 Route codes
Each route is assigned a route code by default:
code "9" for route 1, code "84" for route 2,
code "85" for route 3, code "86" for route 4.
A route can be assigned up to 10 codes, each containing a maximum of 3 digits. Several codes
may be necessary if digit repetition is configured for this route in a network, see Section 10.3.8.
Taking the remaining code plan into consideration, route codes can be changed or additional
codes assigned.
Precondition: digit repetition is activated, automatic line assignment is deactivated, route
assignment is performed.
Example
: the code for route 1 is to be changed to "9", the codes "2" and "3" are to be assigned
to route 2.
Input sequence Meaning Display
A2 2 3
Line codes
(select line 1–32 with "+" and "–" or
directly with "#")
Line 1: 801
B*
Change input Line 1:
C 833
Select line code 833 Line 1: 833
D<OK>
Confirm input Line 1: 833
E
<F8> Return to Start menu System administration
A line code can be deleted by pressing the F3 key under point C.
Input sequence Meaning Display
A2 2 4
Route code, route 1 item 1
(select item 1–10 with "+" and "–",
route 1–4 directly with "#")
Route 1, item 1: 0
B*
Change input Route 1, item 1:
C9
Select route code "9" Route 1, item 1: 9
A route code can be deleted by pressing the F3 key under point C, H or M.

Siemens Hicom 112 Specifications

General

Brand	Siemens
Model	Hicom 112
Category	Telephone
Language	English