Siemens Hicom 112 User Manual

Station attributes
Programming guide
A31003-K16-X001-3-7620
,
07/99
10-46
Hicom 100 E Version 2.1, Service manual
The layout and programming of the 16 possible call destination lists is described in Section
10.6.7.
Call destination list 16 is assigned by default to all extensions or call groups which receive
internal calls (destination list 1 up to SW status 2.0.1).
If the incoming calls for two or more different extensions or call groups are to be processed
differently, individual call destination lists (each with their own specific criteria) are necessary,
see Section 10.6.7.
Example
: extension 26 is to be assigned a call forwarding destination (additional forw. ext.) that
differs from that of the other extensions for internal calls. This ext. must be assigned to a
specific call destination list (call destination list 13 in this example), see Section 10.6.7
10.6.7 Call destination lists
There are three different call types:
1. External call during the day (ISDN and analogue trunk)
2. External call at night (ISDN and analogue trunk)
3. Internal call (CorNet/QSig)
A called destination extension (extension or call group) for each of these three call types is
assigned to one of the 16 possible call destination lists. The default assignments are as follows:
1. External call during the day to call destination list
14
(up to SW 2.0.1: call destination list 1)
2. External call at night to call destination list
15
(up to SW 2.0.1: call destination list 1)
3. Internal call to call destination list
16
(up to SW 2.0.1: call destination 1)
The contents of a call destination list describes the exact procedure of the call and clarifies the
following questions:
Input sequence Meaning Display
A 1 5 1 9 2
List assignment for ext.11 during the
day
(select ext. 11–74 or group 881–888
with "+" and "–" or directly with "#")
List for ext. no. 11: 16
B#
Select ext. List for ext. no.:
C26
Enter ext. 26 List for ext. no.: 26
D<OK>
Confirm input List for ext. no. 26: 16
E*
Change input List for ext. no.: 26
F
13 Assignment to 13 List for ext. no. 26: 13
G
<OK> Confirm input List for ext. no. 26: 13
H
<F8> Return to Start menu System administration

Siemens Hicom 112 Specifications

General

Brand	Siemens
Model	Hicom 112
Category	Telephone
Language	English