Siemens Hicom 112 User Manual

Station attribute
s
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
10-45
Programming guide
10.6.5.2 Changing analogue destination extensions at night
In the case of incoming analogue trunk calls at night, each analogue trunk line can be assigned
any destination extension.
Example
: call group 883 is to be programmed as an analogue destination extension at night
for lines 2 and 3, see also Section 10.6.2.
Call group 883 is now the new analogue destination extension at night for lines 2 and 3.
The default call destination list assigned to call group 883 at night remains 15.
10.6.6 Call allocation for internal calls
In general, extensions are dialled internally in accordance with the internal extension numbers
entered. (The PC tool "Assistant L" is required to change internal extension numbers.)
Each internally dialled extension is assigned a call destination list which specifies the
exact call procedure (e.g. call forwarding, forwarding time, etc.).
C23
Enter extension 23 List for ext. no.: 23
D<OK>
Confirm input List for ext. no. 23: 14
E*
Change input List for ext. no.: 23
F
11 Assignment to list 11 List for ext. no. 23: 11
G
<OK> Confirm input List for ext. no. 23: 11
H
<F8> Return to Start menu System administration
Input sequence Meaning Display
A 1 5 1 8
Call allocation per line, night
(select line 1–32 with "+" and "–" or
directly with "#")
Line 1: 11
B+
Scroll to line 2 Line 2: 11
C*
Change input Line 2:
D883
Destination extension = group 883 Line 2: 883
E<OK>
Confirm input Line 2: 883
F
+ Scroll to line 3 Line 3: 11
G
* Change input Line 3:
H
883 Destination extension = group 883 Line 3: 883
J
<OK> Confirm input Line 3: 883
K
<F8> Return to Start menu System administration
Input sequence Meaning Display

Siemens Hicom 112 Specifications

General

Brand	Siemens
Model	Hicom 112
Category	Telephone
Language	English