Siemens Hicom 112 User Manual

System setting
s
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
10-73
Programming guide
10.7.15.2 Digit suppression
The dialled extension number output in the data record is displayed in full and without digit
suppression by default. Digit suppression can be activated if you want the last three digits of
the dialled extension number to be replaced by a "?".
Example
: digit suppression is to be activated.
10.7.15.3 Recording incoming calls
Incoming calls are not output in the data record (default setting). These calls can be included
in the output.
Example
: incoming calls are to be output in the data record.
Input sequence Meaning Display
A 1 1 3 2
Ext. number display Digit suppression: no
B
* Change input Digit suppression:
C1
Non-compressed output format Digit suppression: yes
D<OK>
Confirm input Digit suppression: yes
E
<F8> Return to Start menu System administration
Digit suppression can be deactivated by entering "0" under point C.
Input sequence Meaning Display
A 1 1 3 3
Output of incoming calls Output: no
B
* Change input Output:
C1
Output incoming calls Output: yes
D<OK>
Confirm input Output: yes
E
<F8> Return to Start menu System administration
The output of incoming calls can be overridden by entering "0" under point C.

Siemens Hicom 112 Specifications

General

Brand	Siemens
Model	Hicom 112
Category	Telephone
Language	English