Miscellaneous
Features
A31003-K16-X001-3-7620
,
07/99
4-10
Hicom 100 E Version 2.1, Service manual
Customer data memory output, binary Via V.24 to a PC
Multilingual text output, system-wide For terminals with display
Multilingual text output, extension-
related
For terminals with display
(as of SW 2.0.2)
Night service, class of service Can be limited to specific extensions
Names for central abbreviated dial
(as of SW 2.0.2)
Numbering scheme, flexible Only with PC.
Voicemail connection To a/b, data transfer by DTMF
Programming dial pauses Analogue trunk
(as of SW 2.0.2)
Remote administration and
maintenance via DTMF
For analogue trunks
(as of SW 2.0.2)
Route names For terminals with display
Reset activated features For each extension, via a defined procedure
(also using PC tool)
Voice channel signalling protection Permanent/temporary, tone intrusion override in voice
channel, including camp-on tone
S
0
trunk DSS1; PP and PMP (point-to-multipoint)
S
0
CorNet-N Consultation hold, transfer, callback, call diversion,
extension number
S
0
extension DSS1 Also point-to-multipoint (terminals with internal power
supply)
Silent call Procedure for deactivating call signal
SW query From programming telephone, system+modules
Temporary call number suppression Own ext. no. is not displayed
Satellite system capability May be used as satellite PBX
Overload indicator FRA only
Closed numbering Always same extension number in the system network
Extension signalling method DP/DTMF
On-hook dialling Handsfree mode
Change external signalling method Temporary DP/DTMF
X.31 connection To the trunk interface
Common ringer a/b or actuator via relay module
Resetting a call Although a call is signalled, the called extension can
seize another line (without answering the first call).
The first call is then signalled as a camp-on call.
Feature Remarks
To Next Page
Loading...
Need help?
General