Siemens Simatic S7 Series

Program instructions
7.13 Program control
S7-200 SMART
302 System Manual, 09/2015, A5E03822230-AC
LAD / FBD
STL
Description
JMP N
The JMP (Jump) instruction performs a branch to the label N within the program.
LBL N
The LBL (Label) instruction marks the location of the jump destination n.
Input / output
Data type
Operand
n
WORD
Constant (0 to 255)
Example: Jump to Label
LAD
STL
If the retentive data has not been
lost, jump to label 4.
Network 1
LDN SM0.2
JMP 4
Label 4
Network 2
LBL 4