YASKAWA Sigma-7 SGD7S Series - Page 193

4. Click the Execute Button.
Fig. 142: Set Origin AXIS#00
5. Click the Continue Button.
Fig. 143: Set Origin - Caution
ð
Click the Cancel Button to cancel setting the origin of the absolute linear
encoder. The previous dialog box will return.
Sigma-7 Series SERVOPACKs
Basic Functions That Require Setting before Operation
Setting the Origin of the Absolute Encoder > Setting the Origin of the Absolute Linear Encoder
| | PROFINET Communications - SIEP YEUOC7P 02A Revision 0 | en | 193