1.
Click the Servo Drive Button in the workspace of the Main Window of the Sig-
maWin+.
2. Select JOG Operation in the Menu Dialog Box.
ð
The Jog Operation Dialog Box will be displayed.
3. Read the warnings and then click the OK Button.
Fig. 206: JOG Operation - Warning
Sigma-7 Series SERVOPACKs
Trial Operation and Actual Operation
Trial Operation for the Servomotor without a Load > Operating Procedure
| | PROFINET Communications - SIEP YEUOC7P 02A Revision 0 | en | 270
To Next Page
Loading...
