11. Click the Reverse Button.
Fig. 232: Tuning - Operation/Measurement Dialog Box - Reverse Button
ð
The Servomotor shaft will rotate in the reverse direction and the measurement
will start. After the measurement and data transfer have been completed, the
Forward Button will be displayed in color.
Fig. 233: Tuning - Operation/Measurement Dialog Box - Forward Button
Sigma-7 Series SERVOPACKs
Tuning
Estimating the Moment of Inertia > Operating Procedure
| | PROFINET Communications - SIEP YEUOC7P 02A Revision 0 | en | 318
To Next Page
Loading...
