10.
Use the and Buttons to change the tuning level.
Click the Back Button during tuning to restore the setting to its original value. The
tuning level will return to the value from before when custom tuning was started.
Fig. 265: Custom Tuning - Tuning Mode 0 or 1 - Changing the tuning level
ð
Tuning Mode 0 or 1
Sigma-7 Series SERVOPACKs
Tuning
Custom Tuning > Operating Procedure
| | PROFINET Communications - SIEP YEUOC7P 02A Revision 0 | en | 359
To Next Page
Loading...
