YASKAWA Sigma-7 SGD7S Series - Page 703

Param-
eter No.
Size Name Setting
Range
Setting
Unit
Default
Setting
Appli-
cable
Motors
When
Enabled
Classifi-
cation
Refer-
ence
Pn456 2 Sweep
Torque Refer-
ence Ampli-
tude
1 to 800 1% 15 All Immedi-
ately
Tuning
Ä Chap.
9.15.2
‘Easy
FFT’
page 426
Param-
eter No.
Size Name Setting
Range
Setting
Unit
Default
Setting
Appli-
cable
Motors
When
Enabled
Classifi-
cation
Refer-
ence
Pn460 2 Notch Filter
Adjustment
Selections 1
0000h to
0101h
– 0101h All Immedi-
ately
Tuning
Ä Chap.
9.5
‘Tuning-
less Func-
tion’
page 303,
Ä Chap.
9.7 ‘Auto-
tuning
without
Host Ref-
erence’
page 321,
Ä Chap.
9.9
‘Custom
Tuning’
page 350
n.X
Notch Filter Adjustment Selection 1
0 Do not adjust the first stage notch filter automatically during execu-
tion of autotuning without a host reference, autotuning with a host
reference, and custom tuning.
1 Adjust the first stage notch filter automatically during execution of
autotuning without a host reference, autotuning with a host refer-
ence, and custom tuning.
n.X
Reserved parameter (Do not change.)
n.X
Notch Filter Adjustment Selection 2
0 Do not adjust the second stage notch filter automatically when the
tuning-less function is enabled or during execution of autotuning
without a host reference, autotuning with a host reference, and
custom tuning.
1 Adjust the second stage notch filter automatically when the tuning-
less function is enabled or during execution of autotuning without a
host reference, autotuning with a host reference, and custom tuning.
Sigma-7 Series SERVOPACKs
Parameter and Object Lists
List of Parameters > List of Parameters
| | PROFINET Communications - SIEP YEUOC7P 02A Revision 0 | en | 703