*5. With PROFINET, this is automatically set during initialization when the power supply is
turned ON.
*6. These parameters are for SERVOPACKs that support the dynamic brake hardware
option specifications. Refer to the following manual for details.
& Σ-7-Series AC Servo Drive Σ-7S/Σ-7W SERVOPACK with Dynamic Brake Hardware
Option Specifications Product Manual (Manual No.: SIEP S800001 73)
*7. The SGLFW2 is the only YASKAWA Linear Servomotor that supports this function.
*8. Enabled only when Pn61A is set to n.2 or n.3.
Sigma-7 Series SERVOPACKs
Parameter and Object Lists
List of Parameters > List of Parameters
| | PROFINET Communications - SIEP YEUOC7P 02A Revision 0 | en | 729
To Next Page
Loading...
