Param-
eter No.
Default
Setting
Name When Ena-
bled
Pn316 10000 Maximum Motor Speed After restart
Pn324 300 Moment of Inertia Calculation
Starting Level
Immediately
Pn383 50 Jogging Speed Immediately
Pn384 10 Vibration Detection Level Immediately
Pn385 50 Maximum Motor Speed After restart
Pn401 100 First Stage First Torque Reference
Filter Time Constant
Immediately
Pn402 800 Forward Torque Limit Immediately
Pn403 800 Reverse Torque Limit Immediately
Pn404 100 Forward External Torque Limit Immediately
Pn405 100 Reverse External Torque Limit Immediately
Pn406 800 Emergency Stop Torque Immediately
Pn407 10000 Speed Limit during Torque Control Immediately
Pn408 0000h Torque-Related Function Selections *
Pn409 5000 First Stage Notch Filter Frequency Immediately
Pn40A 70 First Stage Notch Filter Q Value Immediately
Pn40B 0 First Stage Notch Filter Depth Immediately
Pn40C 5000 Second Stage Notch Filter Fre-
quency
Immediately
Pn40D 70 Second Stage Notch Filter Q Value Immediately
Pn40E 0 Second Stage Notch Filter Depth Immediately
Pn40F 5000 Second Stage Second Torque Ref-
erence Filter Frequency
Immediately
Pn410 50 Second Stage Second Torque Ref-
erence Filter Q Value
Immediately
Pn412 100 First Stage Second Torque Refer-
ence Filter Time Constant
Immediately
Pn416 0000h Torque-Related Function Selections
2
Immediately
Pn417 5000 Third Stage Notch Filter Frequency Immediately
Pn418 70 Third Stage Notch Filter Q Value Immediately
Pn419 0 Third Stage Notch Filter Depth Immediately
Pn41A 5000 Fourth Stage Notch Filter Fre-
quency
Immediately
Pn41B 70 Fourth Stage Notch Filter Q Value Immediately
Pn41C 0 Fourth Stage Notch Filter Depth Immediately
Pn41D 5000 Fifth Stage Notch Filter Frequency Immediately
Pn41E 70 Fifth Stage Notch Filter Q Value Immediately
Sigma-7 Series SERVOPACKs
Parameter and Object Lists
Parameter Recording Table
| | PROFINET Communications - SIEP YEUOC7P 02A Revision 0 | en | 755
To Next Page
Loading...
