Zebra DS9908 Product Reference Guide

Imager Preferences
100
Fixed Exposure
Parameter # 567
SSI # F4h F1h 37h
Type: Word
Range: 5 to 30,000
This parameter configures the exposure used in manual mode for Snapshot mode.
Each integer value represents 100 s of exposure. The default value is 100 which results in an exposure setting of
10 ms.
To set the exposure, scan the Fixed Exposure barcode, and then scan four numeric barcodes from Numeric
Barcodes representing the value. Leading zeros are required. For example, to set a Fixed Exposure value of 99,
scan 0, 0, 9, 9.
Fixed Exposure
(4 digits)

Zebra DS9908 Specifications

General

Sealing	IP52
Scan Technology	Array Imager
Scan Rate	Up to 240 in./610 cm per second
Humidity	5% to 95% RH, non-condensing
Decode Capability	1D, 2D
Connectivity	USB, RS-232, Keyboard Wedge
Image Sensor	1280 x 800
Drop Specification	Multiple 5 ft./1.5 m drops to concrete
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Light Source	LED
Storage Temperature	-40°F to 158°F (-40°C to 70°C)