Symbologies
195
Convert GS1 DataBar to UPC/EAN/JAN
Parameter # 397
SSI # F0h, 8Dh
This parameter only applies to GS1 DataBar Omnidirectional and GS1 DataBar Limited symbols not decoded as
part of a Composite symbol. Scan Enable Convert GS1 DataBar to UPC/EAN/JAN to strip the leading '010' from
DataBar-14 and DataBar Limited symbols encoding a single zero as the first digit, and report the barcode as
EAN-13.
For barcodes beginning with between two and five zeros, this strips the leading '0100' and reports the barcode as
UPC-A. The UPC-A Preamble option that transmits the system character and country code applies to converted
barcodes. Note that neither the system character nor the check digit can be stripped.
Enable Convert GS1 DataBar to UPC/EAN/JAN
(1)
*Disable Convert GS1 DataBar to UPC/EAN/JAN
(0)
To Next Page
Loading...
Need help?
General
