Zebra DS9908 Product Reference Guide

495
CKJ Decode Control
Introduction
This chapter describes control parameters for CJK (Chinese, Japanese, Korean) barcode decode through USB
HID Keyboard Emulation mode.
CJK Control Parameters
Unicode Output Control
Parameter # 973
For a Unicode encoded CJK barcode, select one of the following options for unicode output:
• Universal Output to Unicode and MBCS Application - This default method applies to Unicode and
MBCS expected applications, such as MS Word and Notepad on a Windows host.
• Output to Unicode Application Only - This method applies only to Unicode expected applications, such
as MS Word and WordPad, but not Notepad.
NOTE: Because ADF does not support CJK character processing, there is no format manipulation for CJK
output.
NOTE: To support Unicode universal output, set up the registry table for the Windows host. See
Unicode/CJK Decode Setup with Windows Host on page 499.
*Universal Output
(0)
Unicode Application Only
(1)

Zebra DS9908 Specifications

General

Sealing	IP52
Scan Technology	Array Imager
Scan Rate	Up to 240 in./610 cm per second
Humidity	5% to 95% RH, non-condensing
Decode Capability	1D, 2D
Connectivity	USB, RS-232, Keyboard Wedge
Image Sensor	1280 x 800
Drop Specification	Multiple 5 ft./1.5 m drops to concrete
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Light Source	LED
Storage Temperature	-40°F to 158°F (-40°C to 70°C)