Zebra DS9908 Product Reference Guide

Imager Preferences
110
JPEG Quality Value
Parameter # 305
SSI # F0h 31h
If you selected JPEG Quality Selector, scan the JPEG Quality Value barcode, and then scan three barcodes
from Numeric Barcodes corresponding to a value from 5 to 100, where 100 represents the highest quality image.
Leading zeros are required. For example, to set an image quality value of 55, scan 0, 5, 5.
JPEG Size Value
Parameter # 561
SSI # F1h 31h
Type: Word
Range: 5-350
If you selected JPEG Size Selector, scan the JPEG Size Value barcode, and then scan three numeric barcodes
from Numeric Barcodes representing the target JPEG file size in kilobytes (KB). Leading zeros are required. For
example, to set an image file size value of 99, scan 0, 9, 9.
JPEG Quality Value
(Default: 065)
(5 - 100 Decimal)
CAUTION:JPEG compression may take 10 to 15 seconds based on the amount of information in the target
image. Scanning JPEG Quality Selector (default setting) on page 109 produces a compressed image
that is consistent in quality and compression time.
JPEG Size Value
(Default: 160)
(3 digits)

Zebra DS9908 Specifications

General

Sealing	IP52
Scan Technology	Array Imager
Scan Rate	Up to 240 in./610 cm per second
Humidity	5% to 95% RH, non-condensing
Decode Capability	1D, 2D
Connectivity	USB, RS-232, Keyboard Wedge
Image Sensor	1280 x 800
Drop Specification	Multiple 5 ft./1.5 m drops to concrete
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Light Source	LED
Storage Temperature	-40°F to 158°F (-40°C to 70°C)