Zebra DS9908 Product Reference Guide

Keyboard Wedge Interface
303
Send Make and Break
Scan Send Make and Break Scan Codes to prevent sending the scan codes for releasing a key.
Keyboard Map
The following keyboard map is a reference for prefix/suffix keystroke parameters. To program the prefix/suffix
values, see Prefix/Suffix Values on page 85.
Figure 19 IBM PS2 Type Keyboard
NOTE: Windows-based systems must use Send Make and Break Scan Codes.
*Send Make and Break Scan Codes
Send Make Scan Code Only
7013
7014 5001 5002 5003 5004 5005 5006 5007 5008 5009 5010
7013
5011
7010 7007
7006
7001
5012
7008
7009
7011
7012
7003
7002 7004 7005
7017 7016
7015
7018

Zebra DS9908 Specifications

General

Sealing	IP52
Scan Technology	Array Imager
Scan Rate	Up to 240 in./610 cm per second
Humidity	5% to 95% RH, non-condensing
Decode Capability	1D, 2D
Connectivity	USB, RS-232, Keyboard Wedge
Image Sensor	1280 x 800
Drop Specification	Multiple 5 ft./1.5 m drops to concrete
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Light Source	LED
Storage Temperature	-40°F to 158°F (-40°C to 70°C)