Zebra DS9908 Product Reference Guide

USB Interface
238
Keypad Emulation with Leading Zero
Scan Enable Keypad Emulation with Leading Zero to send character sequences sent over the numeric keypad
as ISO characters which have a leading zero. For example, ASCII A transmits as “ALT MAKE” 0 0 6 5 “ALT
BREAK”.
USB Keyboard FN1 Substitution
This option applies only to the USB Keyboard HID device. Scan Enable USB Keyboard FN1 Substitution to
replace any FN1 character in a GS1 128 barcode with a user-selected Key Category and value.
See FN1 Substitution Values on page 88 to set the Key Category and Key Value.
*Enable Keypad Emulation with Leading Zero
Disable Keypad Emulation with Leading Zero
Enable USB Keyboard FN1 Substitution
*Disable USB Keyboard FN1 Substitution

Zebra DS9908 Specifications

General

Sealing	IP52
Scan Technology	Array Imager
Scan Rate	Up to 240 in./610 cm per second
Humidity	5% to 95% RH, non-condensing
Decode Capability	1D, 2D
Connectivity	USB, RS-232, Keyboard Wedge
Image Sensor	1280 x 800
Drop Specification	Multiple 5 ft./1.5 m drops to concrete
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Light Source	LED
Storage Temperature	-40°F to 158°F (-40°C to 70°C)