Symbologies
206
Composite Beep Mode
Parameter # 398
SSI # F0h, 8Eh
Scan one of the following barcodes to select the number of decode beeps that sound upon decoding a Composite
barcode.
GS1-128 Emulation Mode for UCC/EAN Composite Codes
Parameter # 427
SSI # F0h, ABh
Scan one of the following barcodes to enable or disable this mode.
Single Beep After Both are Decoded
(0)
*Beep as Each Code Type is Decoded
(1)
Double Beep After Both are Decoded
(2)
Enable GS1-128 Emulation Mode for
UCC/EAN Composite Codes
(1)
*Disable GS1-128 Emulation Mode for
UCC/EAN Composite Codes
(0)
To Next Page
Loading...