Zebra DS9908 Product Reference Guide

Imager Preferences
120
Target Video Frame Size
Parameter # 328
SSI # F0h 48h
Select the number of 100-byte blocks to transmit per second. Selecting a smaller value transmits more frames per
second but reduces video quality; selecting a larger value increases video quality but slows transmission.
To set the Target Video Frame Size, scan the barcode below followed by three barcodes from Numeric Barcodes
corresponding to the 100-byte value from 800 to 20,000 bytes. For example, to select 1500 bytes, enter 0, 1, 5. To
select 900 bytes, enter 0, 0, 9. The default is 2200 bytes.
Video View Finder Image Size
Parameter # 329
SSI # F0h 49h
This parameter sets the number of 100-byte blocks. Values range from 800 to 12,000 bytes. A smaller value
transmits more frames per second, while a larger value increases video quality.
Scan the Video View Finder Image Size barcode, and then scan three barcodes from Numeric Barcodes
corresponding to the 100-byte value from 800 to 12,000 bytes. For example, to select 1500 bytes, enter 0, 1, 5. To
select 900 bytes, enter 0, 0, 9. The default is 1700 bytes.
Target Video Frame Size
Video View Finder Image Size

Zebra DS9908 Specifications

General

Sealing	IP52
Scan Technology	Array Imager
Scan Rate	Up to 240 in./610 cm per second
Humidity	5% to 95% RH, non-condensing
Decode Capability	1D, 2D
Connectivity	USB, RS-232, Keyboard Wedge
Image Sensor	1280 x 800
Drop Specification	Multiple 5 ft./1.5 m drops to concrete
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Light Source	LED
Storage Temperature	-40°F to 158°F (-40°C to 70°C)