Imager Preferences
99
Image Capture Illumination
Parameter # 361
SSI # F0h 69h
Scan Enable Image Capture Illumination to turn on illumination during every image capture. This usually results
in superior images. The effectiveness of illumination decreases as the distance to the target increases.
Scan Disable Image Capture Illumination to prevent the imager from using illumination.
Image Capture Autoexposure
Parameter # 360
SSI # F0h 68h
Scan Enable Image Capture Autoexposure to allow the imager to control gain settings and exposure
(integration) time to best capture an image for the selected operation mode.
Scan Disable Image Capture Autoexposure to manually adjust the gain and exposure time (see the following
pages). This option is only recommended for advanced users with difficult image capture situations.
*Enable Image Capture Illumination
(1)
Disable Image Capture Illumination
(0)
*Enable Image Capture Autoexposure
(1)
Disable Image Capture Autoexposure
(0)
To Next Page
Loading...
Need help?
General
