Zebra DS9908 Product Reference Guide

338
Intelligent Document
Capture (Hand-held Mode
Only)
Introduction
Intelligent Document Capture (IDC) is Zebra advanced image processing firmware for select imager based
scanners. This chapter describes the IDC functionality, provides parameter barcodes to control IDC features, and
includes a quick start procedure.
The IDC Process
Intelligent Document Capture:
1. Verifies a barcode is appropriate to use as an IDC anchor or link. See Barcode Acceptance Test on page 339.
2. Determines the rectangular region to capture as an image. See Capture Region Determination on page 339.
3. Processes the captured image. See Image Post Processing on page 340.
4. Transmits the data. See Data Transmission on page 340.

Zebra DS9908 Specifications

General

Sealing	IP52
Scan Technology	Array Imager
Scan Rate	Up to 240 in./610 cm per second
Humidity	5% to 95% RH, non-condensing
Decode Capability	1D, 2D
Connectivity	USB, RS-232, Keyboard Wedge
Image Sensor	1280 x 800
Drop Specification	Multiple 5 ft./1.5 m drops to concrete
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Light Source	LED
Storage Temperature	-40°F to 158°F (-40°C to 70°C)