Zebra DS9908

User Preferences & Miscellaneous Options
72
Hand-held Decode Aiming Pattern
Parameter # 306
SSI # F0h 32h
Scan one of the following barcodes to select when to project the aiming pattern in hand-held mode:
• Enable Hand-held Decode Aiming Pattern - This projects the aiming pattern during barcode capture.
• Disable Hand-held Decode Aiming Pattern - This turns the aiming pattern off.
• Enable Hand-held Decode Aiming Pattern on PDF - This projects the aiming pattern when the scanner
detects a PDF barcode.
NOTE: With Picklist Mode enabled (page 74), the decode aiming pattern flashes even if you disable the Hand-held
Decode Aiming Pattern.
*Enable Hand-held Decode Aiming Pattern
(2)
Disable Hand-held Decode Aiming Pattern
(0)
Enable Hand-held Decode Aiming Pattern on PDF
(3)